office (407) 474-6400
fax (386) 575-3040
email info@mccutter.com

 

 

 

Refurbished Machines

updated (07/19/2018)

 

None available at the moment. Check back soon!

 

All used machines will include the following:

* Cleaning and smoothing of parts, clearcoat of part of bottom frame.

* New parts, nuts, bolts hardware will be installed as necessary to update the machine and/or replace missing/broken parts.

* Cleaning/blowing out of saw brushes and holders.

* Welding/repair of V-Block slot, upright legs, etc. as necessary.

* New crate/box as this is the only way we can ship a machine to avoid damage. Packaging cost is included in price although shipping cost is not.

* New Diamond Cut-off Blade, either 7” or 8” depending on saw that is installed.

* New Coarse-tooth Notching Blades installed. Good, used, spare blades will be included under the V-block when/if available.

* New “prototype” notching blade “guards” will be installed in existing holes as well as Safety Stickers warning of the dangers of the blades. See the Safety Warning sheet for more info…

* Machines will be completely tested and evaluated before shipping and will be ready to work out of the box!

 

Used machines will NOT include the following:

* Instructions and Saw/Drill owner’s manuals.  These documents are available online at www.mccutter.com/downloads.html

* Cable Channel Hold-down (available separately)

* New spare blades—at least one pair of used blades are included

* Hold-down pad staples

* Saw blade wrench—for Hitachi saw use a 10mm wrench or socket and for the Milwaukee saw use a 9/16 wrench or socket

 

Machines are about 10 years old and show cosmetic wear consistent with age and use but are equipped with the robust Milwaukee saw. These are $1600 each plus shipping and handling.

 

Download Printable .PDF

Email info@mccutter.com for more details.