-
NEW! Because of metal and
hardware prices that have continued to rise an average 50% in the past year, effective
July 1, 2007 the price of a new machine will rise to $2295.00.
The price of the yet-to-be-released HomeRun King will rise to $795.00
as well as some accessories and parts. Although we only use it for
testing, MC Cable itself has risen about 100%!
-
NEW! Orders or inquiries
placed before July 1, 2007 will be honored at the old price list
effective January 1, 2007. Please be sure to download the new price sheet
available and effective July 1, 2007.
-
NEW! Because we produce
our machine in "batches" we are often back-ordered a month
or so. Please place your order or inquiry with this in mind... Checks
used for pre-payment are not cashed until we ship the machine.
-
NEW! To keep costs down,
we still do not accept credit cards although we can accept
PayPal for a 3.5% fee on the total. If you have established credit
with us in the past and have paid promptly, we will gladly bill you.
-
NEW! To encourage
pre-payment, which helps us keep costs down (ie: we are not a bank),
the pre-payment discount has risen to 5% (It was 3%) effective with
orders placed after January 1, 2007. We often give preference to
pre-paid orders!
-
NEW! To avoid confusion,
effective January 1, 2007, we have eliminated the 1% within 10 days
discount. It was probably taken advantage of no more than 2 or 3 times
since we offered it. Why not just pre-pay and save an additional 4%?
-
Please note the new price sheets effective
07/01/06.
Although we are trying to not raise the price above $2000.00, rampant
metal price increases may REQUIRE us to raise the price of the MCCC&P
before the summer is up so be sure to place your order now. That would
be two increases within a year which is unprecedented. To put that
into perspective, the first version of the machine sold for $1600.00
in the year 2000 and the price has gradually increased to what it is
now. Keep in mind that $50.00 of the increase is the estimated cost of
the shipping container and a new machine has all of the updates and
revisions that we have developed since then.
-
It has come to our attention that some of you are not
using your machines. (1) Call us to see what we can do to help you get
it up and running and by all means download instructions or whatever
you need to find out how to safely use it. An unused machine does no
one any good. (2) With that in mind, we will buy your old machine from
you. Call us for a quote--we WILL need some digital photos Emailed to
us to determine condition.
-
As of October 1st, 2005, the
price of a new machine increased to $1995.00. This is
due to increased costs of metals, machining and fabrication costs and other components and also packaging costs and labor. If we happen to be back-ordered
when you call, place your order anyway to be put in the queue for the
next available machine. Machines from an existing batch will
remain at $1950.00 until sold. Feel free to prepay by check or money
order and save yourself 3%. Call or fax us for a quote. Local Florida discounts still apply to
local companies who pick up their unpackaged machine in person.
-
Check out the recently
updated Pre-Fab web page.
Check out the new pictures!
-
It's almost ready!
Our new homerun/standalone cutter! We are calling it the Homerun
King! Initial testing
is VERY promising. The price is $595.00 ready-to-work. Call or fax to pre-order for a $50 discount--expected delivery:
January 1, 2006. UPDATE:
Due to patent processing, delivery has been delayed on this
item... Keep checking the Products
web page for more info.
-
YES--we are still in
business!!! The hurricanes of 2004 and related damage put us behind
by a few months but we are mostly caught up! Thank you so much for your
patience and understanding over the last year! Fortunately the
2005 hurricane season has not been a factor.
-
UPDATE:
As of January 1, 2005 we are no longer offering the 30-day trial to
potential customers because it was too easily misused. Sorry for any inconvenience this may
cause. We will still buy your old or used machine from you--the price
we give you will depend on condition--call for details...
-
ATTENTION!!!
Click HERE to read
about patent infringement. Infringing on our patent is the same
as stealing from us (and our kids!)--PLAIN AND SIMPLE!!!
We have a contingency fund set up to allow us to bring infringing
companies to court. We will also be posting their names on our
"Company Hall of Shame" page so stay tuned.
-
ATTENTION!!!
We have a limited number of semi-prepped Black and Decker DR450
drills available to our customers. Although very reliable,
these sometimes need replacement especially in older machines (over 3
years old). Now is the time to pick up a brand-new spare or
spares because we have them all and when they
are gone--they are gone! Our price to you is $70.00 each.
Add for arbors and hardware (see the Order
Form).
-
ATTENTION!!!
We also have new, thicker updated V-blocks for older
machines (35") at a deep discount. Now is the time to cure
that sag you may have experienced with the older, thinner
V-block. Measure yours to see if these will fit. Mention this
page and get 50% off the price in the Order
Form. Call for more info. New machines come with the
updated, thicker and longer V-block (35.5").
-
As of October 1st, 2004, the
price of a new machine increased to $1900.00. This is
due to increased costs of metals and other components and also packaging costs and labor. If we happen to be back-ordered
when you call, place your order anyway to be put in the queue for the
next available machine. Feel free to prepay by check or money
order and save yourself 3%. Local Florida discounts still apply to
local companies who pick up their unpackaged machine in person. See the
following line for more info on shipping.
-
Because of a rash of
damaged-in-transit machines we have had to redesign our
packaging. Hopefully the new package will prevent any damage
during shipping. Unfortunately, it adds about 25 pounds to the
shipping weight. Additionally, we are now using DHL--Let us know how you like their service! Their rates with the
heavier packaging seem to be the same as UPS's with the old
packaging.
-
We've moved! Effective
September 1, 2003 our new address is McCUTTER, Inc., 1930 N. Kingway
Drive, Deltona, FL 32738, Phone: (407) 474-6400, Fax: (386)
575-3040. Please change your contact information accordingly.
-
IN-HOUSE TESTING YIELDS
6-WHIPS-A-MINUTE! In an 8-hour day this could equate to 2880
whips! This was done in a controlled setting using 12-2 Alum.
MC, 9" pigtails, 3' whips and included removing the pigtail
"scraps" from the whips. Realistically, you can expect
to easily cut 4 whips a minute--especially when cutting longer whips
(1920 a day). See the video (prefab.mpg) from our Downloads
page.
-
GET $1000.00 OFF A NEW
MACHINE!!! Click HERE to find out how!
-
Length-of-Whip and Number-of
Whip Counters are now ready for purchase. Click HERE
for the counter page. Details and Pictures will
appear soon or call for more info and latest price.
-
If you have an MC Cable Cutter & Pigtailer
please take the time to fill out our Customer Survey. Click HERE
to download the survey (31k, Word 95/6.0 doc). Completed surveys earn a free pair of
blades from us!
Your answers help us make our machine an even better value for current and
new users. Survey results and user tips can be found HERE.
UPDATE: Look for the most recent survey
in your mailbox this January.
What's New?